Fechar

1. Identificação
Tipo de ReferênciaArtigo em Revista Científica (Journal Article)
Sitemtc-m21d.sid.inpe.br
Código do Detentorisadg {BR SPINPE} ibi 8JMKD3MGPCW/3DT298S
Identificador8JMKD3MGP3W34T/44SSREP
Repositóriosid.inpe.br/mtc-m21d/2021/06.18.12.08   (acesso restrito)
Última Atualização2021:06.18.12.08.07 (UTC) simone
Repositório de Metadadossid.inpe.br/mtc-m21d/2021/06.18.12.08.07
Última Atualização dos Metadados2022:04.03.23.14.00 (UTC) administrator
DOI10.1590/S1517-707620210002.1272
ISSN1579-2641
Chave de CitaçãoCostaRoMaBaReSa:2021:ObNaCa
TítuloObtenção de nanofios de carbono a partir de copolímero de PAN eletrofiados para aplicação como supercapacitores
Ano2021
Data de Acesso05 maio 2024
Tipo de Trabalhojournal article
Tipo SecundárioPRE PN
Número de Arquivos1
Tamanho1061 KiB
2. Contextualização
Autor1 Costa, Hugo Moreira da Silva
2 Rodrigues, Valdinei Euzebio
3 Matsushima, Jorge Tadao
4 Baldan, Maurício Ribeiro
5 Rezende, Mirabel Cerqueira
6 Sales, Rita de Cássia Mendonça
Identificador de Curriculo1
2
3
4 8JMKD3MGP5W/3C9JHTA
Grupo1
2
3
4 COPDT-CGIP-INPE-MCTI-GOV-BR
Afiliação1 Faculdade de Tecnologia de São José dos Campos (FATEC)
2 Faculdade de Tecnologia de São José dos Campos (FATEC)
3 Faculdade de Tecnologia de São José dos Campos (FATEC)
4 Instituto Nacional de Pesquisas Espaciais (INPE)
5 Universidade Federal de São Paulo (UNIFESP)
6 Faculdade de Tecnologia de São José dos Campos (FATEC)
Endereço de e-Mail do Autor1 hugomoreiracosta@hotmail.com
2 valdinei.rodrigues@fatec.sp.gov.br
3 jorge.matsushima@fatec.sp.gov.br
4 mauricio.baldan@inpe.br
5 mirabelcr@gmail.com
6 rita.sales@fatec.sp.gov.br
RevistaMatéria
Volume26
Número2
Páginase12972
Nota SecundáriaC_CIÊNCIAS_SOCIAIS_APLICADAS_I
Histórico (UTC)2021-06-18 12:09:33 :: simone -> administrator :: 2021
2022-04-03 23:14:00 :: administrator -> simone :: 2021
3. Conteúdo e estrutura
É a matriz ou uma cópia?é a matriz
Estágio do Conteúdoconcluido
Transferível1
Tipo do ConteúdoExternal Contribution
Tipo de Versãopublisher
Palavras-ChaveElectrospinning
Carbonization
Supercapacitor
PAN copolymers
ResumoCurrently, there is a demand in the search for materials with high power density, long life cycle and low environmental impact that are mostly used fot the supercapacitors production, which are considered promising energy power for electronic systems. The most promising types of materials for this application are those based on carbon, due to their flexibility, surface area and good electrochemical stability. For the production of carbonaceous materials, the main precursor used is polyacrylonitrile (PAN) and its variations from the addition of monomers, such as methyl acrylate (MA). Generally, these materials are used in forms of blankets or yarns produced from spinning processes and later carbonized to generate the carbonaceous material. One of the spinning processes that has been widely studied for obtaining carbon nanofibers is the electrospinning process. Therefore, this paper presents the results obtained from the carbonization of electrospun blankets manufactured from solutions of polyacrylonitrile homopolymer (PANH) and poly (acrylonitrile-co-6 % methyl acrylate) (PAN6MA) combined with dimethylformamide in order to obtain material for use in supercapacitors. The polymers used were analyzed by DSC to obtain the values related to cyclization, by that were possible to observe a better thermal stability related to the samples of PAN6MA, with a temperature range of 240-312 degrees C and maximum temperature of the exothermic peak of 292 degrees C. The electrospun mats were oxidized at 235 degrees C per 5 min and carbonized at 90 degrees C per 5 min. Both pre-carbonization and post-carbonization mats were analyzed by SEM, showing fibers with smooth surface, randomly dispersion and nanometric size, with values of diameter of approximately 219 nm for PANH carbon nanofibers (NfcPANH) and 185 nm for PAN6MA carbon nanofibers (NfcPAN6MA). The carbonized mats were analyzed by RAMAN technique and it was possible to obtain the data related to the carbon structure present in the samples, where the obtained values showed that the mats manufactured from PAN6MA presented the lower value of degree of crystallinity measured from the relationship between bands D and G known as factor I-D/I-G, the value obtained being equal to 1.06 for NfcPAN6MA and 1.24 for NfcPANH, this shows a higher concentration of crystalline graphitic structures when compared with the samples produced from PANH. To obtain the capacitive characteristic, the load/discharge curves were surveyed by chronopotentiometric analysis, where it was possible to observe the best characteristics related to the specific capacity and low current cycling stability applied to the PAN - co- 6% methyl acrylate sample with specific capacity values of 270.9 F/g, energy density of 30.0 Wh/kg and power density of 153.5 W/kg. The results obtained demonstrated that the material presented potential for the proposed application.
ÁreaFISMAT
Arranjourlib.net > BDMCI > Fonds > Produção a partir de 2021 > CGIP > Obtenção de nanofios...
Conteúdo da Pasta docacessar
Conteúdo da Pasta sourcenão têm arquivos
Conteúdo da Pasta agreement
agreement.html 18/06/2021 09:08 1.0 KiB 
4. Condições de acesso e uso
Idiomaen
Arquivo Alvocosta_obtencao.pdf
Grupo de Usuáriossimone
Grupo de Leitoresadministrator
simone
Visibilidadeshown
Permissão de Leituradeny from all and allow from 150.163
Permissão de Atualizaçãonão transferida
5. Fontes relacionadas
Unidades Imediatamente Superiores8JMKD3MGPCW/46KUES5
Lista de Itens Citandosid.inpe.br/bibdigital/2022/04.03.23.11 4
sid.inpe.br/mtc-m21/2012/07.13.14.56.32 1
DivulgaçãoPORTALCAPES; SCOPUS.
Acervo Hospedeirourlib.net/www/2021/06.04.03.40
6. Notas
Campos Vaziosalternatejournal archivingpolicy archivist callnumber copyholder copyright creatorhistory descriptionlevel e-mailaddress format isbn label lineage mark mirrorrepository month nextedition notes orcid parameterlist parentrepositories previousedition previouslowerunit progress project rightsholder schedulinginformation secondarydate secondarykey session shorttitle sponsor subject tertiarymark tertiarytype url
7. Controle da descrição
e-Mail (login)simone
atualizar 


Fechar